This page must be viewed with IE4 or above, and with Active Scripting enabled.
SERIES 31
INSTRUMENT AND CONTROL SWITCHES
Switch Diagram
Features •   Double-Sided, Double-Wiping, Knife-Type Rotary Contacts •   Silver Contact Surfaces for Long, Reliable Life •   Terminal Screws – Easy Installation •   Standard Four Hole Mount Single Hole Mount Available - Consult Factory Control Switch Special Features •   Spring Return to Normal (Vertical) Position Instrument Switch Special Features •   Make-Before-Break (Shorting Contacts) •   Common Input Tap Switch Arrangement -– Sequentially Connected to Several Lines Using the Same Switching Deck •   Positive Positioning Detent Mechanism •   Pre-Wired Jumpers Electrical Specifications Continuous Ratings •   15A/600V Interrupt Ratings •   10A/120VAC •  5A/240VAC •   3A/600VAC •  5A/30VDC •   1A/125VDC •   Overload Current (50 operations): 60A/125VAC Resistive •  Voltage Breakdown: 2200V rms minimum •   Insulation Resistance: 100 Megohms minimum • Contacts Resistance: .01ohms maximum Mechanical Specifications Sections 1 to 10 Poles 1 to 20 Positions 8; Adjustable Stops for 2–8 Position Rotation Contacts Break-Before-Make (Non-Shorting); Make-Before-Break (Shorting) Action 45° Positive Detent Indexing Mounting 4 Hole Panel Thickness 3/16" Max. Standard Rotor Contacts Silver Plated Phosphor-bronze, Double Grip Stationary Contacts Silver Plated Copper, w/Integral Screw Type Terminals Construction Contacts Enclosed in Molded-phenolic Disks Approvals •   UL File No. E18174 •   CSA